CopyOne Repro Kit* Flash/Continuous Light Copy Lighting Unit

Code no: 5660

Combined flash and continuous light copy lighting unit, consisting of two CopyOne* flash/continuous light lamp heads and lamp arms. Each lamp head equipped with flash tube and 126 SMD LEDs, both with daylight quality.

The high light intensity with flash light mode provides for short exposure times without camera shake and eliminates the impact of distracting light sources.

The continuous light mode can be used for video and photo shots. The maximum illuminance of the SMD LEDs is 2000 lux**, the light is flicker-free and dimmable. Furthermore the LEDs serve as a setting light with flash operation and are dimmed proportionately to the flash light.

The setting height of the lights is continuously adjustable, the lights can be swiveled and shifted. Light emitting area each 63.5 x 20.5 cm (25 x 8.1 in.). Diffusion screen for soft and even illumination. 5 m (16.4 ft.) connecting cables, with round plug.

Lamp arms made of steel tube with square cross section, edge dimension 25 mm (1 in.).
Vertical arms with scale, tiltable by lock joints. Fastening with solid clamp holders to boards up to 55 mm (2.2 in.) thick.

A single CopyOne lamp head can also be mounted to suitable, commercially available light stands or fixtures using the 3/8” connection thread that is integrated in the mounting bracket.  

A Hensel flash generator – e.g. Nova D 1200 (Kaiser code no. 5662) is required for power supply and control.

Light sources:

Each lamp head with one flash tube
Max. flash power:  1200 Ws
Setting range:  up to 8 f-stops, 1/10 steps (depending on generator)
Flash duration:  1/1000 s – 1/4500 s (depending on generator and flash power)
Color temperature:  5400 Kelvin
Color rendering index: CRI > 96

Each lamp head with 126 SMD LEDs
Color temperature:  5400 Kelvin
Color rendering index: CRI = 95
Angle of radiation:  110°


The CopyOne Repro Kit lighting unit is suitable for all RD system copy stands and can also be mounted to the 5615 table frame or to the 5630 and 5712 tables for illumination of rePRO system copy stands.



* Jointly developed by Kaiser Fototechnik and Hensel-Visit.
** Based on uniform illumination of a 16.5 x 11.5 in. flat subject.

 

Accessories

5662 - Hensel Nova D 1200 Flash Generator

5664 - Hensel Strobe Wizard Plus Radio Transmitter

5665 - Barn Doors

5667 - Hensel Adapter Cable

5668 - Hensel Flash Extension Cable

5594 - Polarizers for reflectors up to 64 x 21 cm

Subject to errors and technical changes.

This product is marketed for the purpose of illumination for image capture. It is not intended for use in other applications.

This site uses cookies. By continuing to access this site you are accepting the use of cookies by this site. Privacy Notice